T6S

The T6S borrows its spoke profile and general design cues from the highly successful Kojin and adds a sixth spoke to achieve an aggressive, yet subtle appearance. The T6S comes standard with Enkei’s signature flat center cap, and is available in 17 and 18 inch. The T6S is also built using Enkei’s original MAT technology to achieve the ultimate in strength and light weight.

Sizes 17, 18
Matte Silver, Matte Black or in Gold (limited sizes)
Spec-E Inspected
MAT Technology

Category: Tuning Series

PART NO.	FINISH	SIZE	INSET	PATTERN	BORE	EST. WEIGHT	FACE
485-780-4445	SP, BK	17x8	45	5x112	72.6	20.55	F
485-780-6535	SP, BK	17x8	35	5x114.3	72.6	20.55	F
485-780-6540	SP, BK	17x8	40	5x114.3	72.6	20.55	F
485-780-6545	SP, BK	17x8	45	5x114.3	72.6	20.55	F
485-780-8045	SP, BK, GG	17x8	45	5x100	72.6	20.55	F
485-790-6535	SP, BK	17x9	35	5x114.3	72.6	22.45	F
485-790-6545	SP, BK	17x9	45	5x114.3	72.6	22.45	F
485-790-8045	SP, BK	17x9	45	5x100	72.6	22.45	F
485-880-1232	SP, BK	18x8	32	5x120	72.6	21.5	F
485-880-1242	SP, BK	18x8	42	5x120	72.6	21.5	F
485-880-4435	SP, BK	18x8	35	5x112	72.6	21.5	F
485-880-4445	SP, BK	18x8	45	5x112	72.6	21.5	F
485-880-6535	SP, BK	18x8	35	5x114.3	72.6	21.5	F
485-880-6545	SP, BK	18x8	45	5x114.3	72.6	21.5	F
485-880-8045	SP, BK, GG	18x8	45	5x100	72.6	21.5	F
485-885-1235	SP, BK	18x8.5	35	5x120	72.6	21.9	F
485-885-4442	SP, BK	18x8.5	42	5x112	72.6	21.9	F
485-885-6525	SP, BK	18x8.5	25	5x114.3	72.6	21.9	F
485-885-6535	SP, BK	18x8.5	35	5x114.3	72.6	21.9	F
485-885-6550	SP, BK	18x8.5	50	5x114.3	72.6	21.9	F
485-885-8045	SP, BK	18x8.5	45	5x100	72.6	21.9	F
485-895-1235	SP, BK	18x9.5	35	5x120	72.6	22.7	R
485-895-4435	SP, BK	18x9.5	35	5x112	72.6	22.7	R
485-895-6515	SP, BK	18x9.5	15	5x114.3	72.6	22.7	R
485-895-6530	SP, BK	18x9.5	30	5x114.3	72.6	22.7	R
485-895-8045	SP, BK, GG	18x9.5	45	5x100	72.6	22.7	R

Generated by wpDataTables

Description

MAT Technology
Enkei developed a new manufacturing process to produce the next aluminum wheel generation. The Most Advanced Technology (M.A.T) combines one-piece cast wheel technology with a rim forming technology called spinning process. Using this new technology of casting and rim forming by M.A.T process, is critical to improve drastically the material property and strength of the wheels. Rim-Rolled technology shapes the rim to improve material elongation without sacrificing the wheels hardness.

SPEC-E
All Enkei wheels are engineered to pass rigorous testing. In fact, Enkei established its own test standard called “Spec-E,” which is tougher than JWL requirements. Enkei’s Spec-E test setting requires a higher drop point in the impact test and 20% more cycles for the rotary bending fatigue and dynamic radial fatigue tests than JWL standards.The Spec-E represents Enkei’s confidence in its technology and quality of Enkei wheels.